rockers

[Guest]

History Commands

[December 30, 2008, 04:29:43 PM] brand70: its fuel injected

[December 30, 2008, 05:34:19 PM] rusty71: We have a 1971 VW Bus and would like to shorten it.  Does anyone out there know how to cut the bus in half.  Do you have pics

[December 30, 2008, 05:35:19 PM] rusty71: Need to know the pros and cons of cutting a bus to shorten it.  Please help!!!

[December 30, 2008, 05:41:54 PM] rusty71: This bus has a rebuilt motor and carb.  It does not want to idle when it warms up.  It's a Solex 34.  What's Up?

[December 30, 2008, 10:30:12 PM] zenos1988: i heard about a place in alamogordo new mexico where they can build a vw bus fromth  ground up for 12000.

[December 30, 2008, 10:31:34 PM] zenos1988: does anybody know about this place ?a website ? please im desperate

[January 03, 2009, 04:03:37 PM] two yanks: I want to convert my right hand drive to left hand drive. Any suggestions?

[January 03, 2009, 09:03:52 PM] rusty71: http://www.lovemybus.com/forum/index.php?action=activate;u=1710;code=d31dc185bf

[January 03, 2009, 09:04:09 PM] nwflgirl: I sewed new bus curtains and they ROCK..pics in the morning..

[January 03, 2009, 09:07:03 PM] rusty71:  We have a 1971 VW Bus and would like to shorten it.  Does anyone out there know how to cut the bus in half.  Do you have 

[January 04, 2009, 07:18:08 AM] edwin .s.nathan: I live in a tropical country ie malaysia.Need to install air conditioning.Any idea on where to put the vents

[January 05, 2009, 10:21:13 AM] BusManVW70: Hello everyone Im new to the site and I have just added some pictures of my 1970 VW Camper his name is Fred enjoy..

[VDUBBERBOY]

well rear driver side quarter panel is in. i will try to get some pics next time i go to work on her. i am getting ready to chop off all out and inside rocker panels on the bottom driver side. it is weird how 95% of all my rot is on the driver side only. but any ways any tips on completely replacing the whole bottom rocker section of a bay window would be sweet thanks every one. -Jefferia

[fastmc25]

Just remember to measure 6 times , cut once..... 

 I usually place the replacement panel over the bad area and mark the body with a sharpie..... then cutout the bad section about a 1/4" below the mark...... then you can grind up and trim to match the panels correctly.....works every time.....

[itlives]

I have a fairly detailed record of mine . It's inside and out drivers side -just like yours, all my rust was on the drivers side! I't NO FUN doing the inside rocker
Go to www.vwrides.com
bus forum
" 74 Westy"
I hope it helps!